SNAP-TITE® 1.5
ROOF & WALL APPLICATIONS
Snap-Tite® 1.5 is a completely customizable hidden fastener roofing solution for your project. Available in 12″ or 16″ wide panels with a 1.5″ major rib and the minors in beads or striations, the possibilities are endless. Most commonly used in residential projects, Snap-Tite® 1.5 can easily be incorporated into any agricultural or commercial project.
And it’s not just for roofs. Snap-Tite® 1.5 can also be used on the walls!
Check our selection of Snap-Tite® 1.5 Trims!
PRODUCT DETAILS
- 1-1/2” ribs on 12” centres
- 12” coverage (width)
- Minors available in beads or striations
- Available in
- 26 gauge
- 24 gauge (special order only)
- Minimum roof slope 3:12
- 40 year paint warranty
PRODUCT DETAILS
- 1-1/2” ribs on 16” centres
- 16” coverage (width)
- Minors available in beads or striations
- Available in
- 26 gauge
- 24 gauge (special order only)
- Minimum roof slope 3:12
- 40 year paint warranty
〔 Roof Application 〕
Notice: Prior to beginning your installation use a check list to make sure you have everything you will need to install your metal roof.
All SNAP-TITE® panels must be installed over a solid substrate.
- Panel Installation should begin at the gable end of the roof opposite the prevailing rain bearing wind (this will help ensure that wind driven rain will not penetrate the lap).
- For best results a synthetic underlayment over the solid roof deck should be used to repel any moisture from the roof deck and will eliminate any potential issues with condensation.
