Polycarbonate & PVC Trims
WHY IS 3/8” BETTER THAN 1/2”?
In the PVC paneling industry, thicker is not always better. The interior walls and the space between the front and back wall of the panel are the weaker parts of the overall design. If you stretch the interior wall, you will effectively decrease the overall impact strength of your panel. Therefore, a 3/8” panel is much stronger and longer lasting than a 1/2” panel.
WHY IS THE MAXIMUM WIDTH 16”?
If you have weight or tension on the panel (insulation or an angled fastener), it creates pressure between both ends and eventually the panel starts to bow or sag. In the PVC paneling industry, it is proven that 16” is the best and maximum width to use. METEX PVC Liner Panels are easily able to withstand these pressures and will not bow or sag.
H-Divider
MXHD
2pc. H-Divider
MXHD2
Inside Cove
MXISC
2pc. Inside Cove
MXISC2
Outside Corner
MXOSC
J-Trim
MXJT
Base Trim
MXBT
L-Trim
MXLT
2pc. Crown Trim
MXCT
Polycarbonate Ridge Cap
PCRC
Poly-Carbonate ridge cap is ideal for greenhouses and other applications where excellent light transmission is needed in a lightweight product. Also, these ridge caps have a high resistance to the harmful effects of weather: both for the impact strength to resist hail damage and in UV protection.
- Crystal clear (0.047 thickness)
- Stocking size of 2′ x 10′
