SNAP-TITE® 1.5

ROOF & WALL APPLICATIONS

Snap-Tite® is a completely customizable hidden fastener solution for your project. With choices such as 1” or 1.5” major ribs; 12” or 16” panel width; and the minors in beads or striations; the possibilities are endless. This profile is most commonly used in residential projects, but can easily be incorporated into any agricultural or commercial project.

PRODUCT DETAILS

  • 1-1/2” ribs on 12” centres
  • 12” coverage (width)
  • Available in
    • 29 gauge Hi-Tensile
    • 26 gauge
    • 24 gauge (special order only)
  • Minimum roof slope 3:12
  • 40 year paint warranty

PRODUCT DETAILS

  • 1-1/2” ribs on 16” centres
  • 16” coverage (width)
  • Available in
    • 26 gauge
    • 24 gauge (special order only)
  • Minimum roof slope 3:12
  • 40 year paint warranty

Roof Application

Notice: Prior to beginning your installation use a check list to make sure you have everything you will need to install your metal roof.  

All SNAP-TITE® panels must be installed over a solid substrate.

  • Panel Installation should begin at the gable end of the roof opposite the prevailing rain bearing wind (this will help ensure that wind driven rain will not penetrate the lap).
  • For best results a synthetic underlayment over the solid roof deck should be used to repel any moisture from the roof deck and will eliminate any potential issues with condensation.