Sidewall Flashing
Sidewall flashing is applied when the side of the roof butts up against an adjacent wall. The wall side of the flashing can either be covered over with siding or sealed with caulk. Butyl tape should be applied where the “foot” of the flashing attaches to the roof.
MESW1 - Sidewall Flashing
- This Sidewall flashing allows for approximately 6.375″ of coverage
MESW2 - Sidewall Flashing
- This Sidewall flashing allows for approximately 4″ of coverage
- Recommended for SNAP-TITE®
MESW3 - Sidewall Flashing
- This Sidewall flashing allows for approximately 4″ of coverage
- Recommended for SNAP-TITE 1.5® & Standing Mechanical Seam
MESW5 - Sidewall Flashing
- This Sidewall flashing allows for approximately 4″ of coverage
- Recommended for Hybrid 35®
MESW426 - Sidewall Flashing
- This Sidewall flashing allows for approximately 7″ of coverage
- Recommended for PBR-1236®
Custom Trims
Chances are we can make it!
Give us your drawing complete
with measurement details & colour.
1
State of the art computer
fabrication process.
2
Trim completed & ready
for shipment.
3
